skip to main content

Outlets

Jennifer Varshavsky

3 months ago

Did you have to do any prep on tiles to get outlet covers on?

Kitchen Backsplash - Wave Panel Tile · More Info

Sort by:Oldest

Comment (1)

PRO
Custom Surface Solutions
2 months ago
Sorry for the delayed response. The answer is no. Swtich and plug recepticles have metal tabs top and bottom that overlap the front-side of the tile. What you may need though depending on the depth of the rough-in box is longer screws to mount the outlet to the rough-in box. Also, make sure that the tile cutout is smaller than the perimeter of the outlet cover but, clears the small screw hole for the outlet cover mounting screw.
Related Discussions
We all use Houzz - What other tools do you use?
Q
Comments (12)
I've had a look at free offerings for floor planning software. It depends on the level you want to go to. Sweethome3D http://www.sweethome3d.com/ is truly free because it's open source (no fees if you want to draw more than one plan etc). I've found I can get reasonably detailed with it from layout perspective but I doubt it would be good enough for a drawings for a building permit (although I'm not certain of this). As a graphic designer you'll have an affinity for graphics software. If you want to be able to draw more detailed drawings Id take the time to learn Sketchup. I know some architects use this as their software of choice. I'm definitely with you @Jason Carter - the only way to really control your budget is to plan ahead and choose and price everything that you can think of before you break ground. Otherwise you're in a situation where you have to make quick compromises during the build which leads to mistakes etc. In my work we use requirements tracking tools. I think it would be really helpful to communicate to the contractors exactly what is going to go on in the room - why the extra outlets are there and in the position they're in. That way they have a deeper understanding of why the specs are the way they are and they don't make decisions that detract from the design - they might even come up with suggestions that support the ideas behind the designs.
...See More
New kitchen, but just not working.
Q
Comments (448)
fragle0 ... congratulations on the new addition to your family. Have been following your lovely changes. You probably won't have time to work on the decor for a while. Just wanted to suggest that you try pulling the nesting tables forward to be more in line with front of the chairs & placing your floor lamp to the back of them. This will give a bit more light at night for reading in that area.Also switching the plant by the fireplace & the one on the corner by the sofa.
...See More
Mixing antique brass and polished chrome in the dining room & kitchen
Q
Comments (16)
What I'm actually wondering though is about mixing the metals - so having the chandelier and lamps with the touch of silver - or would I be better to source antique brass lamps like I have in some other rooms in the house - I kind of wanted to feature quite a bit of glass, and generally the glass comes with chrome, but I'm not sure if it's too modern for the sideboard etc, and mores worried about the clash of metals, but something tells me it might be ok in this instance! I have chrome taps and rainfall shower head in new bathroom and kept with antique brass for the light fittings and door/press knobs. Also yes the room is small but that's not an issue - it is what it is and I'm fine with it!
...See More
Apartment hallway - far end focal point?
Q
Comments (14)
Hello nicnoll, Another idea could be to have a wall light that is all about the bulb! A few links to both ideas.... Copper is good too... Guessing you can have them pointing up or down for ones that don't have a moving hinge.. http://www.oldschoolelectric.com/vintage-light-bulbs/ http://www.industville.co.uk/collections/wall-sconce-bar-restaurant-lamps/products/vintage-barn-angled-brass-wall-lamp A ceiling light.. http://www.industville.co.uk/collections/ceiling-lights-lampshades/products/brooklyn-vintage-brass-cone-lampshade OR.. One other idea... have a rose with multi flex wires... centralised where the current one is.. Then choosing cable/flex and lengths.. run them along to where you want.. either along ceiling.. in loops with hooks to loop round and fix position, so then excess becomes a drop pendant to add something lovely.... Or you run them in loops across the ceiling to the opposite wall and have a wall light fitting but the electric cable comes from the one ceiling point. So less to do wiring wise.. Plus this makes for a very interesting bespoke installation.. with coloured flex cable running in loops along the hallway.. . : )) http://www.urbancottageindustries.com/historic-lighting/ceiling-roses/multiple-outlet-ceiling-roses/ceiling-rose-multiple-cable-flex-outlet-vintage-brass http://www.urbancottageindustries.com/historic-lighting/fabric-cable/twisted-lighting-flex/copper-fabric-lighting-flex-cable-twist
...See More

Sponsored

Reload the page to not see this specific ad anymore

More Discussions

How would you lay out this bathroom?

10

Authentic Feng Shui Workshop - Angel Times Limerick 27th April 2024

0

reconfiguring floor plan layout and would love help please

2

Interior Design Classes April to June 2024

0

Tiles for open plan space

5

Ireland

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.