Hi guys, I need some help. I bought handmade cement bejmat Moroccan tiles for both bathroom and kitchen walls. They were installed the other day and grouted however the tiler forgot to impregnate them or seal them. Some of them have also chipped meaning water can get on the cement part of these chipped tiles. Can I seal and impregnate these tiles now that they are already installed? And have you any idea on how I'd prevent more chipping? And repair the ones that are chipped already? My main concern on the chipping is that water will get in and start to erode other tiles etc and who knows where they problem will stop tbh. Plus they don't look as they should too so it's not as aesthetically pleasing unfortunately. Here's a photo of one of the walls where you will see the small chips in some of them! Thank you in advance, Katie :)

Claire O'Brien

We are renovating our bathroom and I have picked a light blue and white tiles to go in there, the tiles come in 30cm x 60 rectangular blocks. I am looking for advice on the best way to layout these tiles on the wall. The height of the room means if laid vertically you will have approx 4.5 tiles.

Hi I recently had to replace the boiler in the kitchen range. Some tiles were broken (about 7" at the front) when the range was taken out. The tiler said not to use the spares I have because the other floor tiles will chip/crack when taking up the broken ones. He suggests putting a surround. I am looking for advice/suggestions please. Please excuse the messiness! I'm under time pressure because the tiler is coming on Thursday this week. Thanks everyone