Floors
Felicia E
7 years ago
Featured Answer
Sort by:Oldest
Comments (9)
Oak & Broad
6 years agoRelated Discussions
Old pine floors
Comments (15)We are in the process of filling our gaps with pine slithers (they cam in different widths) You can buy them online. You do suffer from bald/ red knees when you hammer them in and then need to chisel them down so they are flush with the rest of the floor but it really does help. What you can also order with the pine slithers is pine saw dust with resin - you mix the two up and can fill the really narrow gaps which the slithers don't fit into. If you don't mind spending the time doing this I would recommend it yourself (especially if you're worried about costs), depending how big the surface is, and then have someone in to do the sanding. The varnishing you can also do you yourself with a normal paint roller. We also recently had a quote for sanding and varnishing and I think it came to £500 for mid size living room and 3 m length hall....See MoreHelp with downstairs flooring dilemma
Comments (1)You could do a black paint trim over the wooden bits. It would go with the work tops. But not so much with the creamy doors; Or get all of the kitchen units spray painted white? I think if you try to match the floor with the wood of the units in the kitchen you may leave yourself open to a mismatch or even just an overload of wood. I didn't feel there was enough black there as the island top kind of took me by surprise on first seeing it. But could you remove that granite altogether and see how it looks then? Maybe it's the black that's the problem not the wood at all...See MoreHelp! Brand new floor bothering me - Replace it or live with it?
Comments (3)I know exactly how you feel. I had a similar situation. The prospect of lifting the board and potentially raising the level made me wait. The wood darkened, and now I'm never fully sure where that board is. In fact, I forgot all about it till I saw this post. Wait a while. If it still bothers you in six months or a year maybe then consider lifting it. But I guarantee you won't, lol!...See MoreWood floor?
Comments (4)I disagree. This is standard whitewood T&G flooring. It's generally laid across joists by builders on the first floor of two storey houses as a cheap subfloor ready to take a floor finish. I've seen it sanded and varnished / stained and while it looks OK for a few months, it doesn't wear well as it's a (very) soft wood and is very noisy, particularly in the rooms under. If you want a wood finish without breaking the bank, there are some good laminates that you can lay over the T&G boards. A semi-engineered board would be better but will cost a bit more....See MoreFelicia E
6 years agorbmom
6 years agorbmom
6 years agoKim B
6 years agoBernskoetter Construction
6 years agoFelicia E
6 years agoFelicia E
6 years ago
Sponsored
Reload the page to not see this specific ad anymore
Bernskoetter Construction