Hi snan - to address your questions: 1 - yes, the lamps work very well. With regard to the height of the larger lamps: do you know how high they would be? If the bottom of the lampshade is even with the top of the pillows that should work. If they are taller than that I think you will be okay with the smaller lamps. Look back again at some of the pictures above to see what I mean. The thing that will look odd would be if the top of the lamps were taller than your headboard. The idea is that when you are in bed reading a book that you want the light to be able to reflect down. As far as the lampshade size goes on the smaller lamps I'm thinking the shorter ones since they don't seem to drop down as far as the larger ones. 2 & 3-Definitely chair by the mirrored bedside locker with one white locker on the other side. Without question. The chair to the left of the bed gave the room life. Use the extra white one in a closet or another room. You don't want to overcrowd your room when you are going for a tranquil setting. 4-Absolutely okay to have bedside tables that don't match and look good in the room. Whether or not you like that is a personal preference though. I would only put the mirrored one next to the bed though if you have the chair next to it. It's how they play off each other that makes it work. If you don't keep the chair next to the bed then I would use both white tables beside the bed. It is also fine that the pictures are off-centre to the wall as long as they are centered to the bed. :)

Paint the doors black matt and the fames cream add silver crome door furniture. Huge silver mirror above the covered radiator then add a runner of any colour you like and match it with the lamps and lighting. hey presto done.

I have to agree that glass film is brilliant- we used Purlfrost online. You can either pre measure and they will cut for you you or you can buy a piece and cut to your own specs. It arrives rolled in a tube. We've done two rooms- the living room with full frost and the other, a bedroom- with just the bottom half of the window covered which looks pretty modern and sharp. It was supposed to be a temporary solution till we got shutters organised but it looks so effective and fresh that we've decided to save the small fortune that shutters cost! The help line was great- they recommended leaving a gap around the edge near the frame for a beveled glass effect which did actually work! You can get different levels of opaqueness - we used the less opaque for more light but still private- or patterns or stained glass effect. Its really easy to apply yourself too, and apparently comes off with no damage to the glass at all, so good if. Works out really economical as well. Can you tell I'd recommend it?! :)

This might sound a bit like being on the fence given the advice you've had already... How about a mid to dark grey ( less contrast than black), RAL 7022 is a favourite of mine (warmer grey), or look at a green grey, as something that will have the colour of the olive, with a good amount of contrast against the white render, (you won't have the warm rich colours of the brickwork as in the photos above (which the olive looks good against)). If you are painting the timber windows you would do well to look at microporous opaque stains to reduce your on-going maintenance. A benefit of aluclad composite windows is colour outside can be factory supplied different to the interior finish. Hope this might help. Regards, Nick