skip to main content

manufacturer and stain

2 years ago

Who manufactures the cabinets and what is the stain color?

Fashionista's Master Bath in Northwest Denver · More Info

Sort by:Oldest

Comment (1)

PRO
Christopher's Kitchen & Bath
2 years ago
Hello there and thank you for your question. These are a custom cabinet from Hallmark Cabinetry in Utah and are a custom finish and glazing.
Related Discussions
Need help with a red carpet
Q
Comments (28)
Ok - currently saving money on carpet; already have pool table and lamp for this area. What about creating different seating areas in the room. You said there are built ins? Computer station? Family using this space. Here is MY suggestion: I would use MORE than one rug - each for specific areas of this room. You can have the sisal berbers made to fit - and I think ONE large one would actually end up being a little messy as this would be huge - and could get off bounds? (out of shape) You could have these bound and use them to create different areas within the larger space? Is that a gold or a taupe or beige color between the red pattern? Here is my suggestion : the opposite side of the color wheel tones down the other - since this is a red color - how about using a very soft BLUE/GREY on the ceiling? Or a very soft Grey/Blue? And a very soft taupe or mocha color on the walls - something which is within the SAME tonal family as the NON-red portion of your rug? This should go nicely with your brown sofa and the sisal or other type berbers? YES - get one larger one (RUG for the area in front of the TV . . . large enough to go from the baseboard area - to completely under your sofa? BTW - LAZYBOY makes beuatiful furniture - and you do NOT have to get the plumped and rolled ubiquitious leather chair. OR, I can personally, highly recommend FurnitureLa South, in Hickory N.C. - and they will deliver for FREE! Love that! They have a style for everyone and this is where they actually make the furniture. They sell ALL manufacturers at cost. Well not Lane or Ethan Allen. My one last thought - since this is such a very large space - I would also get a rather substantial and DARK drapery rod using finials - and extend the width of the drapes to help balance the room on the other side with the windows. Since you have built ins on the other side - this will help balance the space visually. IF you do not like the color of the fixture material on the pool table light - you can get any finish you desire in a rustoleium paint - I would consider spray painting this something in the neighborhood of a oil rubbed bronze; or something with more of a dark patina? This would also help balance out the room and bring focus into the space you are utilizing - the rest will fade away. SO - ceiling paint a must; paint the trim or add a more traditional trim - at least 5 inches in depth; TWO separate rugs - not one big one - at least one for now for the TV area; Extend your drapes and raise them almost to the ceiling to help balance the room; Darker drape rod - and double the fabric for your drapes to make them look fuller; Spray paint a darker finish on to the pool table fixture. Use a tone of paint on the wall which will go with the tone of the other color of your rug! Another thought: You consider finding an old wooden bench - or church pew ??? that would be fun; you could place facing into the space around the pool table area? This will give folks a place to sit and could help further define your separate areas?
...See More
Granite, beautiful or not worth the Money?
Q
Comments (18)
ms1zebra, Thanks for your comment and interest! River-rock finished aluminum is a great surface. Its unfinished textured top allows for increased durability for work surfaces. It is resilient with heat, stains, oxidation, but will show signs of use if heavy objects are dropped on or slid across it or cutting is done on it with steel knives. As mainly a lighting manufacturer, we do not heavily promote our tile choices, so we haven't made much of an impact on the tile market. Perhaps when folks think of aluminum as a material, they think about unfinished flat aluminum sheet, which is not a good or even available choice for kitchen surfaces. However, our tumbled finish and thick castings give durability and a great balance between a classic weathered and modern look. Best of all, our aluminum is 100% post consumer recycled, non-mined, locally sourced, made in the USA. We are a Benefit Corporation (B-Corp), triple bottom line company with pioneering experience in sustainable manufacturing. We hope you'll spread the word if you like our product. For more information you can visit our website: http://www.eleekinc.com/tiles/ Thanks again for your interest.
...See More
floor tiles
Q
Comments (4)
Hi @mjdpower, My suggestion is to go to a couple of floor specialist and ask as they may come up with something different. Whatever you do keep in consideration the size of the room and think on a long term: a poor quality finish could effect your property price in a space as important as the kitchen. I will try something that allow you to go back to your original tiles floor if things do not work out the way you want them to go. A cheap way is to cover the tiles with vinyl and here is how to do it: http://www.doityourself.com/stry/how-to-install-vinyl-flooring-over-ceramic-tiling#b the adhesive should not stain or damage the tiles (ask the manufacture before doing it anyway!) and you have a large choice of design and colours. Paint tiles could be another option, not my favourite but an option. I found this blog where Curry Kay describe step by step how she's did it. It's American USA but it will give you an idea to start with. https://currykay.wordpress.com/2011/03/01/powder-room-brand-new-floor-painting-tile-tutorial/comment-page-1/ Be aware that the kitchen is a high usage room so the paint will take a good bashing and may wear off. Plus the final look on a large surface like the kitchen area could be not as good as on a splash back or smaller vertical surface. I hope it helps! Have fun!
...See More
Tiling Disaster
Q
Comments (18)
If the grout was supposed to be white but has come out grey then there is either an issue with the grout or this is as I described before. I certainly wouldn't use a grout pen until you have looked at cleaning the residue from it. If this is polymer residue then the grout pen would only stick to this so would probably wear off and become patchy. If there is an issue with the grout then you should speak to the manufacturer, this does happen on occasions and they will check it if they are a reputable company. Who was the grout manufacturer? Email Ceramica is the group of companies which Viva belongs to. So I suspect that this is the tile I mentioned. I know the tile as we sell it, the tile is very good quality. Speaking as a tiler with 18 years experience if the grout was grey and has come out white then it can only be the issues I have described. Cleaning should definitely be your first option.
...See More

Sponsored

Reload the page to not see this specific ad anymore

More Discussions

Panelling hallway & cupboard

0

Authentic Feng Shui Workshop - Angel Times Limerick 27th April 2024

0

Interior Material Clash?

0

House re-design

0

Help, do i cancel the windows order

1

Ireland

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.