thanks, My dilemma is that the doors, skirting and architrave are all oak but the frames are MDF, any thoughts on what my options might be to make all these items work? I want to maintain the natural oak finish by simply staining but what to do with the MDF frames??

Post picture

I have to agree that glass film is brilliant- we used Purlfrost online. You can either pre measure and they will cut for you you or you can buy a piece and cut to your own specs. It arrives rolled in a tube. We've done two rooms- the living room with full frost and the other, a bedroom- with just the bottom half of the window covered which looks pretty modern and sharp. It was supposed to be a temporary solution till we got shutters organised but it looks so effective and fresh that we've decided to save the small fortune that shutters cost! The help line was great- they recommended leaving a gap around the edge near the frame for a beveled glass effect which did actually work! You can get different levels of opaqueness - we used the less opaque for more light but still private- or patterns or stained glass effect. Its really easy to apply yourself too, and apparently comes off with no damage to the glass at all, so good if. Works out really economical as well. Can you tell I'd recommend it?! :)

After washing the facade there two options, 1 prime or 2 paint. 1. Use primer only nano technology (nano primer, paint, or plaster keeping their façades look bright all the time). 2. If you consider paint recommendation to use also nano paint or nano thermal ceramic paint. Nano paint just keeps the facade with no changes for life, but thermal paint not just keeps the facade bright at all the time but also dry out your house and reduce heating costs up to 33%. For more info you can visit our web site.