skip to main content

Great floor

7 years ago

Do you have any details on the floor and where it was supplied from, including finish (oil, lacquer etc)? Looks great! Thanks

An Arts and Crafts Kitchen in Kent by deVOL · More Info

Sort by:Oldest

Comment (1)

PRO
deVOL Kitchens
7 years ago
Hello. This beautiful Arts & Crafts house was built in 1887 and this was actually the original floor! The customers sanded it down and then added a wax to give this beautiful rustic look back to it. We hope this helps. deVOL Kitchens
Related Discussions
Need help on flooring!
Q
Comments (21)
You should have a professional installer in your area take a look at your home so you can discuss what end result you are wanting. You may need to use an engineered wood. This is still an all wood product and is much more dimensionally stable than solid wood. This is a huge advantage if you are in an older home or in the midwest where humidity levels can drastically change from season to season. A solid wood will cup or curl if humidity and moisture levels are not managed. Your installer should do a moisture test before installation to make sure the installation does not fail. All warranties will be voided if this step is not taken. Also, your transitions will need to be considered. Is the new wood floor going to butt up to tile, carpet, or vinyl? The height difference in the two products will need to be taken into consideration. You will have a greater selection of thicknesses in the engineered woods. Engineered wood should be several plys, all wood. If you choose a solid wood, the hand scraped versions are fantastic for a high traffic area with children. Hickory, Red Oak, most Brazilian Species, and even Bamboo are hard enough to take everyday traffic and still look terrific. Good luck!
...See More
Would dark wood floor in hall leading to light oak floor kitchen work?
Q
Comments (10)
What I have always thought is, if you try to "match" an existing floor it looks like you tried and missed. When you go with something completely different, the result is yes, I wanted something different, and here it is. Especially if you lay it in a different direction. Does that make sense?
...See More
Floors
Q
Comments (3)
Kitchen's suffer from extreme humidity variation, so you should fully adhere the solid or engineered flooring to avoid a bowing/warping floor in a few months time However, here's another viable option; luxury vinyl tiles (LVT). Generally, LVTs are 2.5mm thick, made from 100% pvc (therefore waterproof), come with a thick polyurethane wear layer that normally is backed up with a manufacturers warranty, with a wood or stone effect finish. LVTs are great with underfloor heating and unlike ceramics, they don't break when heavy objects are dropped on them and unlike wooden floors, once laid, LVTs need no further maintenance other than regular vacuuming and washing. LVTs are almost indestructible! There are many options available but us Flooring Gurus recommend going for a recognised brand. The whole idea about an LVT is for it to look authentic. They need to genuinely look like the wood or stone flooring they are mimicking. Cheap alternatives, when installed, look ... well ... awful! Try looking at Polyflor's Colonia and Camaro. We sell these products online at www.flooringmegastore.co.uk and if you made contact with us, we'd be happy to despatch a few free of charge samples to you, plus a glossy catalogue, to help you research the products a bit more. We're the Flooring Gurus!
...See More
Should I paint the floor boards white?
Q
Comments (17)
It looks very pretty. I would look at pics of painted floors versus whitewashed and see which you prefer then people can hopefully help with methods. I've used chalk paint but not on a floor. Annie Sloan sell floor lacquer so you don't need to use the wax which is very time consuming to apply, the lacquer can be rollered on. The only thing I would say is that it does not adhere to I think varnish made in the 80's and I find the White paint coverage is poor although not an issue if white washing. I wondered if there was a cheat method using zinsser to avoid sanding if using normal paint and have found this, no idea on how successful it is! http://www.zinsseruk.com/how-to-guide/how-to-paint-woodstained-or-varnished-surfaces/
...See More

Sponsored

Reload the page to not see this specific ad anymore

More Discussions

Panelling hallway & cupboard

0

Authentic Feng Shui Workshop - Angel Times Limerick 27th April 2024

0

Single story extension

1

Help, do i cancel the windows order

1

Authentic Feng Shui Workshop

0

Ireland

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.