Floor

PHASE 2 Photography

8 years ago

can I ask what you have used for the floor, and if you have underfloor heating?!
Many Thanks

St Mary`s Place, Weybridge · More Info

Comment

Related Discussions
Floors
Q
Comments (3)
Kitchen's suffer from extreme humidity variation, so you should fully adhere the solid or engineered flooring to avoid a bowing/warping floor in a few months time However, here's another viable option; luxury vinyl tiles (LVT). Generally, LVTs are 2.5mm thick, made from 100% pvc (therefore waterproof), come with a thick polyurethane wear layer that normally is backed up with a manufacturers warranty, with a wood or stone effect finish. LVTs are great with underfloor heating and unlike ceramics, they don't break when heavy objects are dropped on them and unlike wooden floors, once laid, LVTs need no further maintenance other than regular vacuuming and washing. LVTs are almost indestructible! There are many options available but us Flooring Gurus recommend going for a recognised brand. The whole idea about an LVT is for it to look authentic. They need to genuinely look like the wood or stone flooring they are mimicking. Cheap alternatives, when installed, look ... well ... awful! Try looking at Polyflor's Colonia and Camaro. We sell these products online at www.flooringmegastore.co.uk and if you made contact with us, we'd be happy to despatch a few free of charge samples to you, plus a glossy catalogue, to help you research the products a bit more. We're the Flooring Gurus!
...See More
White Oiled Floors - Parquet Flooring or Plank?
Q
Comments (0)
If your dream home was to use a white oiled finish would you choose a traditional wide plank or a modern style herringbone floor?
...See More
Wood floor?
Q
Comments (4)
I disagree. This is standard whitewood T&G flooring. It's generally laid across joists by builders on the first floor of two storey houses as a cheap subfloor ready to take a floor finish. I've seen it sanded and varnished / stained and while it looks OK for a few months, it doesn't wear well as it's a (very) soft wood and is very noisy, particularly in the rooms under. If you want a wood finish without breaking the bank, there are some good laminates that you can lay over the T&G boards. A semi-engineered board would be better but will cost a bit more.
...See More
Please help with floor plan
Q
Comments (6)
I prefer the flow and functionality of option 1. Would you consider merging the utility and bathroom into 1? With downstairs bedrooms, you have a challenge with noise, especially if the loo is your main downstairs facility. So noise insulation will be key. There are lots of great products that you should get advice on for the partition walls but also between floors depending on what is above the bedroom.
...See More

Floor

Comment

Related Discussions

COMPANY

EXPLORE HOUZZ

CONNECT WITH US