Where to Place Your Kitchen Cabinetry Hardware
Does it go in the middle of the drawer, on the edge or nowhere at all? Get advice on positioning knobs and pulls
Barbra Bright
10 April 2019
Houzz Contributor. San Francisco-based designer.
http://www.barbrabrightdesign.com/
Houzz Contributor. San Francisco-based designer.
... More
Remodeling a kitchen can be a daunting undertaking. There are so many decisions to make that it’s easy to feel overwhelmed. And just when the end of your remodel is in sight, your contractor asks one last question: “Where would you like the hardware placed on your cabinetry?”
It probably never occurred to you that there are placement options for your hardware. Like most design options, placement is based on a combination of tried-and-true design solutions and one’s own aesthetic. Let’s explore hardware placement so that when your contractor comes asking you’ll be prepared.
It probably never occurred to you that there are placement options for your hardware. Like most design options, placement is based on a combination of tried-and-true design solutions and one’s own aesthetic. Let’s explore hardware placement so that when your contractor comes asking you’ll be prepared.
Lower Cabinetry: Drawers
Option 1: Centered. The most popular placement is to center the hardware in the middle of each drawer front. Aesthetically pleasing and symmetrical, the main drawback to this placement is that the bottom drawer can be difficult to reach since the hardware is low.
The first photo shows a five-piece drawer front, also known as a decorative drawer front, which echoes the door style. A five-piece drawer front consists of a center panel surrounded by a frame. The vertical portion of the frame is called the stile and the horizontal, the rail. Stiles and rails can be of varying widths depending on the door and drawer style you select.
Find a kitchen designer in the Houzz pro directory
Option 1: Centered. The most popular placement is to center the hardware in the middle of each drawer front. Aesthetically pleasing and symmetrical, the main drawback to this placement is that the bottom drawer can be difficult to reach since the hardware is low.
The first photo shows a five-piece drawer front, also known as a decorative drawer front, which echoes the door style. A five-piece drawer front consists of a center panel surrounded by a frame. The vertical portion of the frame is called the stile and the horizontal, the rail. Stiles and rails can be of varying widths depending on the door and drawer style you select.
Find a kitchen designer in the Houzz pro directory
The gray island in this photo also shows center placement of the hardware in each drawer front. The difference is that the top drawer front is a slab, or flat, style, whereas the lower drawers are decorative. It’s not uncommon to mix the two drawer styles to achieve a less formal look.
Shop for cabinet and drawer pulls in the Houzz Shop
Shop for cabinet and drawer pulls in the Houzz Shop
Option 2: Centered on top. In this option, the hardware is centered in the middle of the top drawer only. For all the lower drawers, it is placed on the top rail. Some find this placement visually unbalanced, while others appreciate its blend of form and function.
Placing the hardware on the rail instead of centering it in the middle of the drawer front makes it easier to open the lower drawers — especially for the taller members of the household.
Find a contractor in the Houzz pro directory
Find a contractor in the Houzz pro directory
Option 3: All on top. This is my preferred configuration for its symmetry and functionality. The hardware is placed on each rail if the drawer fronts are five-piece.
For a mix of slab and five-piece drawer fronts, as in this photo, the hardware is placed on the top quarter of the slab drawers to mimic their placement on the rails of the decorative fronts.
Option 4: Top one-third. What if the drawers are all slab? In this photo, the hardware is placed in the top third of each drawer. But because the fronts are slab, there is the added flexibility to place the hardware in the top one quarter, or even to center it. The choice depends on your own aesthetic.
Option 5: Two-pull placement. Is there a secret to placing two pulls on a drawer? Well, here’s mine: Divide the drawer in half and center a pull in each half and it will be perfectly balanced. For example, if your drawers are 36 inches wide, half of 36 is 18, half of 18 is 9. Therefore, each pull is centered 9 inches from the left and right edge of the drawer front.
Option 6: No hardware. I love the clean, seamless look of cabinetry without hardware. Most cabinetry sans hardware uses a magnetic touch latch system to open and close the doors and drawers. Press on the cabinet or drawer and a spring-loaded plunger opens it. Press again and a magnetic catcher holds it closed.
But this modern look comes at a price. The natural oils on your fingertips are transferred to the cabinet’s face and will eventually damage its finish where it is repeatedly touched.
But this modern look comes at a price. The natural oils on your fingertips are transferred to the cabinet’s face and will eventually damage its finish where it is repeatedly touched.
Option 7: Channel system. One option to help avoid degrading the finish with repeated use is an integrated channel system. A channel system offers a clean look with the ability to open base cabinetry without touching the drawer fronts. Instead, you pull on the integrated metal lip.
This photo shows the metal lip of a channel system more clearly.
Door Cabinetry: Uppers and Lowers
Unlike drawer cabinetry, hardware placement for door cabinetry is much more subjective. The knob or pull can align with the rail, or it could be higher, or lower — there are no rules. Well, except for this rule: The hardware spacing for the wall cabinets should match the base cabinets. Let’s look at a few options.
Option 1: Horizontal. If you’re looking for a more modern aesthetic, place the hardware horizontally, as in this bamboo kitchen.
Unlike drawer cabinetry, hardware placement for door cabinetry is much more subjective. The knob or pull can align with the rail, or it could be higher, or lower — there are no rules. Well, except for this rule: The hardware spacing for the wall cabinets should match the base cabinets. Let’s look at a few options.
Option 1: Horizontal. If you’re looking for a more modern aesthetic, place the hardware horizontally, as in this bamboo kitchen.
Option 2: Vertical edging lower rail. In this photo, the hardware for the wall cabinets are centered on the top edge of the lower rail. The pull placement for the lower cabinetry doors mirrors the placement of the uppers.
Option 3: Vertical extending into rail. Here, the pulls extend into the bottom rail of the wall cabinets and top rail of the base cabinets. This makes for a convenient location to reach, especially for wall cabinets that are a bit higher.
Option 4: MIdway up on stile. This green Shaker-style kitchen places the knobs midway up on the stiles of the upper cabinets. It’s a great look but perhaps difficult to reach for those who aren’t tall.
And the lower door cabinets use different hardware altogether — proving my point that anything goes. Keep in mind that hardware placement is really about what works best for you. Any one of the options we’ve considered can work. Go with the one you like best and that will also deliver comfortable function.
Find cabinet knobs in the Houzz Shop
Tell us: Where do you think cabinet hardware looks best? Share your thoughts and pictures in the Comments.
More on Houzz
5 Color and Style Trends for Kitchens and Baths in 2019
Find a design or remodeling pro for your next project
Shop for home products
And the lower door cabinets use different hardware altogether — proving my point that anything goes. Keep in mind that hardware placement is really about what works best for you. Any one of the options we’ve considered can work. Go with the one you like best and that will also deliver comfortable function.
Find cabinet knobs in the Houzz Shop
Tell us: Where do you think cabinet hardware looks best? Share your thoughts and pictures in the Comments.
More on Houzz
5 Color and Style Trends for Kitchens and Baths in 2019
Find a design or remodeling pro for your next project
Shop for home products
Related Stories
Houzz Tours
Houzz Tour: A Midcentury Home With a Strong Indoor-outdoor Link
By Becky Harris
A nature-inspired renovation has given this ranch house a relaxed mood and a connection to the outdoors from most rooms
Full Story
Kitchens
10 Smart Storage Tips for Your Kitchen Bins
Keep kitchen rubbish stylishly tucked away with these clever solutions
Full Story
More Rooms
The 5 Most Popular Laundry Rooms on Houzz Right Now
Get decorating ideas for your laundry or utility room from these most-saved photos on Houzz
Full Story
Gardens
How Do I Create a Drought-tolerant Garden?
By Kate Burt
As summers heat up, plants that need less water are increasingly desirable. Luckily, there are lots of beautiful options
Full Story
Houzz Tours
Houzz Tour: Warm Tones and Luxurious Surfaces in a City Townhouse
An earthy colour palette, hidden storage and well-placed texture add character and practicality to this London home
Full Story
Gardens
5 Inspiring Before and After Garden Transformations
Check out what a difference designers have made to these once dull plots, visually expanding spaces and creating privacy
Full Story
Houzz Tours
Kitchen Tour: A Gorgeous Extension With a Leafy Glasshouse Feel
By Kate Burt
When the owners of this terraced house extended, they were keen to retain its period feel and highlight the garden
Full Story
Gardens
How to Disguise Rubbish and Recycling Bins Outside Your Home
Need to hide unsightly bins in your garden or driveway? Take a look at these clever ideas for inspiration
Full Story
Renovating
21 Ways Designers Are Incorporating Arches Into Homes
By Kate Burt
Everywhere we look on Houzz right now, a cheeky arch pops up. How would you add this timeless architectural feature?
Full Story
Lifestyle
How to Improve the Air Quality in Your Home
Want to ensure your home environment is clean and healthy? Start by assessing the quality of your air
Full Story
What is the best approach for placing knobs on slab doors? We have a few that are 18” wide x 39” tall. I like symmetry and so placement 2”x2” from the bottom corner of the uppers seems right, but my husband likes 2” in x 3” high. Ugh! Maybe 1.5” x 1.5”? 1.5 x 3? Any suggestions are welcome!
Hi! I’m going with you, lol—2” from both edges. I’m assuming there are base doors in your design? 2” would work better for the lowers.
Question: Installing drawer pulls in brand new kitchen. Placement is center top/bottom and center left/right for traditional raised panel cabinets and drawers. Installed one pull at both centers, found placement looks too low due to perspective, from standing view. Am tempted to raise all bottom drawer pulls 1/4" higher, off center, top and bottom so pull appears centered from standing position. Will raising pulls create additional issues now or down the line i.e. changing hardware, sale of house? Best to keep centered all sides or adjust pull height center to center? Please advise.