How to Avoid and Remove Carpet Stains
Know the right solutions – and when to use them – to prevent stains from pets, wine, chocolate and more
If you’ve ever had a carpet freshly cleaned, or rolled out a new rug, only to watch in horror as it became a stain magnet for everything from pet accidents to spilled wine and dirty shoes, then you’ll know the feeling – part panic, part action hero – that transforms even the mildest-mannered among us into grime fighters.
It’s an occurrence that professionals in the area of carpet care know well. In fact, when it comes to spot removal, experts such as those at the US-based Carpet and Rug Institute (CRI) and specialist cleaning company Coit are nothing short of stain-fighting superheroes. The best part? You can be one at home, too. Cape optional. Here’s how.
It’s an occurrence that professionals in the area of carpet care know well. In fact, when it comes to spot removal, experts such as those at the US-based Carpet and Rug Institute (CRI) and specialist cleaning company Coit are nothing short of stain-fighting superheroes. The best part? You can be one at home, too. Cape optional. Here’s how.
Tackle the worst of the spillage
- Act fast When a stain happens, act quickly. The CRI says that, since most carpets today are made to be stain-resistant, many accidents can be remedied if you get to them in time. The longer the delay, the higher the chance of something becoming permanent.
- Blot, don’t scrub Using a white cloth or ink-free paper towels (to avoid the danger of additional dyes bleeding into the carpet), blot the stain. Avoid using a scrubbing motion, which can cause the spot to spread or work the problem deeper into the carpet fibres. Keep blotting until the area is completely dry.
- Scrape If semi-solids are part of the problem, scrape them off the floor carefully with a spoon. Vacuum the solids until they’re completely removed.
Employ a spot treatment
Before treating a rug stain with a spot-removal product, test it out on an inconspicuous area first – ideally you would have purchased a recommended stain-removal product when you bought your carpet or rug.
The CRI says this is an important step, because some cleaning solutions can cause damage. Its advice? Apply several drops to the testing area and hold a white cloth on the wet area for 10 seconds. Next, check the carpet and the cloth for colour transfer or visible damage to the rug. If you notice colour coming off onto the cloth or discolouration on the rug, test another product.
Once you’ve identified a safe cleaning solution, the institute advises applying a small amount to the stain and letting it sit for about 10 minutes. Next, working from the outside edges of the stain inwards, gently blot the spot. Repeat as needed.
Before treating a rug stain with a spot-removal product, test it out on an inconspicuous area first – ideally you would have purchased a recommended stain-removal product when you bought your carpet or rug.
The CRI says this is an important step, because some cleaning solutions can cause damage. Its advice? Apply several drops to the testing area and hold a white cloth on the wet area for 10 seconds. Next, check the carpet and the cloth for colour transfer or visible damage to the rug. If you notice colour coming off onto the cloth or discolouration on the rug, test another product.
Once you’ve identified a safe cleaning solution, the institute advises applying a small amount to the stain and letting it sit for about 10 minutes. Next, working from the outside edges of the stain inwards, gently blot the spot. Repeat as needed.
The institute says in many cases, patience is the most important superpower, as it may be necessary to repeat the same step several times.
After the stain has been completely removed and a brief happy dance has ensued, it’s time to rinse the treated area thoroughly with lukewarm tap water and blot dry (again with the blotting!) until all the cleaning solution has been removed. The institute warns that some products will cause staining and spotting of their own if they are not rinsed completely.
To dry, stack a 1cm layer of plain paper towels on the spot and weigh it down with a flat, heavy object (or stand on it). Continue the process, changing paper towels as needed, until the excess water has been absorbed and the carpet is dry.
If you feel the need for speed, the institute suggests using a dry, absorbent cleaning compound to accelerate the drying time.
After the stain has been completely removed and a brief happy dance has ensued, it’s time to rinse the treated area thoroughly with lukewarm tap water and blot dry (again with the blotting!) until all the cleaning solution has been removed. The institute warns that some products will cause staining and spotting of their own if they are not rinsed completely.
To dry, stack a 1cm layer of plain paper towels on the spot and weigh it down with a flat, heavy object (or stand on it). Continue the process, changing paper towels as needed, until the excess water has been absorbed and the carpet is dry.
If you feel the need for speed, the institute suggests using a dry, absorbent cleaning compound to accelerate the drying time.
Take a specialised approach
Knowledge is power. Knowing what kind of stain you’re dealing with will determine the best course of action. Here’s how to attack some of the most common rug and carpet stains.
Knowledge is power. Knowing what kind of stain you’re dealing with will determine the best course of action. Here’s how to attack some of the most common rug and carpet stains.
Coffee, tea and soft drinks One of the CRI’s most recommended methods for cleaning a variety of stains begins with a combination of ¼ teaspoon of washing-up liquid with 1 cup (237ml) of lukewarm water. According to the experts, although you may be tempted to add more washing-up liquid, don’t do it. The less soapy residue you have to rinse out at the end, the better.
To create the solution, use a mild washing-up liquid, never a laundry or dishwasher detergent, since those often contain optical brighteners or bleaching agents, which can harm carpet dyes and fibres.
If the stain is stubborn, follow the this with a mixture of 1 cup (237ml) of white vinegar for every 2 cups (473ml) of water. The CRI says that since white vinegar is a 5% acetic acid solution, it acts as a solvent that will work on both the stain and the washing-up liquid residue.
Finally, when it’s time to rinse the area, the institute advises using lukewarm tap water in a spray bottle. This precaution is aimed at avoiding over-saturating the carpet and harming the layers beneath. Blot with paper towels and pat dry after each rinse. Several rinses may be necessary to thoroughly eliminate the residue.
You might also like How to Be More Green When You Clean.
To create the solution, use a mild washing-up liquid, never a laundry or dishwasher detergent, since those often contain optical brighteners or bleaching agents, which can harm carpet dyes and fibres.
If the stain is stubborn, follow the this with a mixture of 1 cup (237ml) of white vinegar for every 2 cups (473ml) of water. The CRI says that since white vinegar is a 5% acetic acid solution, it acts as a solvent that will work on both the stain and the washing-up liquid residue.
Finally, when it’s time to rinse the area, the institute advises using lukewarm tap water in a spray bottle. This precaution is aimed at avoiding over-saturating the carpet and harming the layers beneath. Blot with paper towels and pat dry after each rinse. Several rinses may be necessary to thoroughly eliminate the residue.
You might also like How to Be More Green When You Clean.
Pet urine It’s not just the carpet stain but the lingering odour of pet accidents that concerns most homeowners. After the mess has been cleaned up, treat the stain with a product dedicated to pet stains or use the previously mentioned washing-up liquid solution. Blot until almost dry.
The US-based Humane Society suggests that, after you remove the stain, use a high-quality pet odour neutraliser, which can be found at most pet supply stores. It cautions against using cleaning agents with strong odours, such as ammonia or vinegar, which it says may encourage your pet to reinforce the scent of urine in that area.
Here’s one DIY method for neutralising the scent, recommended by cleaning experts at US-based Coit. Mix ½ cup (118ml) of 3% hydrogen peroxide with 1 teaspoon of a mild washing-up liquid and put it in a spray bottle. Then sprinkle one to two handfuls of baking soda (depending on the size of the stain) over the area and spray with the soapy solution. Gently massage the dissolving baking soda into the carpet and allow the spot to dry completely. Finish by vacuuming.
As with all stains, test the process on carpet in an out-of-the-way spot first.
The US-based Humane Society suggests that, after you remove the stain, use a high-quality pet odour neutraliser, which can be found at most pet supply stores. It cautions against using cleaning agents with strong odours, such as ammonia or vinegar, which it says may encourage your pet to reinforce the scent of urine in that area.
Here’s one DIY method for neutralising the scent, recommended by cleaning experts at US-based Coit. Mix ½ cup (118ml) of 3% hydrogen peroxide with 1 teaspoon of a mild washing-up liquid and put it in a spray bottle. Then sprinkle one to two handfuls of baking soda (depending on the size of the stain) over the area and spray with the soapy solution. Gently massage the dissolving baking soda into the carpet and allow the spot to dry completely. Finish by vacuuming.
As with all stains, test the process on carpet in an out-of-the-way spot first.
Blood If blood gets on your carpet, I’m guessing the first thing that comes to mind isn’t how you’re going to clean the rug. Once the emergency has passed, however, it’s time to address the mess – and quickly.
If the blood has dried, gently loosen it with a wire brush to remove surface debris. Then use the washing-up liquid solution with cold water to clean and blot.
It’s important to note that bloodstains should be treated with cold water, not hot, because heat may cause the stain to set permanently.
If repeated cleaning and blotting with the washing-up liquid solution doesn’t do the trick, Coit suggests an alternative option. Mix ½ cup (118ml) of water with 1 tablespoon of ammonia. Using a cloth or sponge, apply the ammonia solution to the blood stain. Blot until the liquid is fully absorbed. Finally, apply a sponge dipped in cold water to the stain and blot until dry.
If the blood has dried, gently loosen it with a wire brush to remove surface debris. Then use the washing-up liquid solution with cold water to clean and blot.
It’s important to note that bloodstains should be treated with cold water, not hot, because heat may cause the stain to set permanently.
If repeated cleaning and blotting with the washing-up liquid solution doesn’t do the trick, Coit suggests an alternative option. Mix ½ cup (118ml) of water with 1 tablespoon of ammonia. Using a cloth or sponge, apply the ammonia solution to the blood stain. Blot until the liquid is fully absorbed. Finally, apply a sponge dipped in cold water to the stain and blot until dry.
Chocolate The professionals at Coit offer this advice for removing chocolate stains: first, scrape off as much of the dried chocolate as you can. Next, vacuum the stained area to remove any remaining flakes.
Once the area has been cleaned, cover the spot with paper towels and set an iron to the lowest non-steam setting. When the iron is warm, move it slowly over the paper towels. The chocolate should melt and stick to the paper towels. Keep the temperature steady, and as the paper towels absorb the chocolate, replace them with clean ones. Repeat until the stain has disappeared.
Here’s another approach: the institute recommends using a solvent, a non-flammable spot solution, or a dry-cleaning-type solvent on chocolate stains as the first line of defence. It advises to never pour a solvent directly onto the carpet, since it might permeate the layers and damage the latex that binds the primary and secondary backings.
Once the area has been cleaned, cover the spot with paper towels and set an iron to the lowest non-steam setting. When the iron is warm, move it slowly over the paper towels. The chocolate should melt and stick to the paper towels. Keep the temperature steady, and as the paper towels absorb the chocolate, replace them with clean ones. Repeat until the stain has disappeared.
Here’s another approach: the institute recommends using a solvent, a non-flammable spot solution, or a dry-cleaning-type solvent on chocolate stains as the first line of defence. It advises to never pour a solvent directly onto the carpet, since it might permeate the layers and damage the latex that binds the primary and secondary backings.
Need a pro for your home renovation project?
Let Houzz find the best pros for you
Let Houzz find the best pros for you
Wax The experts at Coit advise attacking candle drippings on the carpet first with a bag of ice. Place the ice over the spot and let it freeze for a few minutes. Next, remove the bag and scrape off the dried wax with the edge of a butter knife.
Vacuum up any remaining pieces. If wax residue remains, place a brown paper bag or clean cloth over the spot and, using a warm iron on a low, non-steam setting, move gently over the bag or cloth. The heat will cause the residue to be absorbed into the bag or cloth. Repeat with a fresh bag or cloth until the residue is gone.
If a coloured candle leaves a stain, pour a small amount of rubbing alcohol onto a clean white cloth and gently dab at the stain. Blot the carpet until it’s dry.
Vacuum up any remaining pieces. If wax residue remains, place a brown paper bag or clean cloth over the spot and, using a warm iron on a low, non-steam setting, move gently over the bag or cloth. The heat will cause the residue to be absorbed into the bag or cloth. Repeat with a fresh bag or cloth until the residue is gone.
If a coloured candle leaves a stain, pour a small amount of rubbing alcohol onto a clean white cloth and gently dab at the stain. Blot the carpet until it’s dry.
Ink markers Everyone loves a good art project – just not on the carpet. If a petite Picasso has left a mark on your rug, there are several options for taking care of the stain.
Coit recommends dabbing the ink stain with either rubbing alcohol or a cheap lacquer hairspray. Use a white towel to blot the spot – the professionals say you should see the colour transferring from the carpet to the cloth.
Once the area is stain-free, dab it to rinse away residue with a damp towel. If colour remains on the carpet, repeat the process using more hairspray.
The bad news is that, although you may be able to lighten or reduce the stain in some cases, permanent markers are in fact permanent. Still, it’s worth a try.
Coit recommends dabbing the ink stain with either rubbing alcohol or a cheap lacquer hairspray. Use a white towel to blot the spot – the professionals say you should see the colour transferring from the carpet to the cloth.
Once the area is stain-free, dab it to rinse away residue with a damp towel. If colour remains on the carpet, repeat the process using more hairspray.
The bad news is that, although you may be able to lighten or reduce the stain in some cases, permanent markers are in fact permanent. Still, it’s worth a try.
Tomato sauce Mamma mia! To get a tomato sauce stain out, act quickly. Work from the outside of the stain to the inside, and use a spoon or the edge of a knife to remove any excess sauce from the carpet, according to Coit.
Next, pour a generous amount of soda water onto the affected area of the carpet and use a damp sponge to blot up the stain. Then, take a clean paper towel and press it onto the area to absorb moisture or residue.
Finally, treat the spot using the washing-up liquid solution, then blot, rinse and dry.
Next, pour a generous amount of soda water onto the affected area of the carpet and use a damp sponge to blot up the stain. Then, take a clean paper towel and press it onto the area to absorb moisture or residue.
Finally, treat the spot using the washing-up liquid solution, then blot, rinse and dry.
Grease stains Cheese pizza hit the floor facedown? Fried chicken slipped off the platter? Coit advises the following:
Blot up as much of the grease stain as possible, then apply something like cornflour, which will act to absorb the grease. After a few minutes, use a brush with stiff bristles to brush away the stain and break it up. If the spot is still there, Coit suggests trying a dry-cleaning solvent and applying it with a clean sponge according to the directions.
Next, create what Coit calls a dry spotter, made by combining eight-parts liquid dry-cleaning solvent and one-part coconut oil. Mineral oil works, too, but not as effectively. Apply the mixture to the stain. Blot with a dry, absorbent towel or pad, and repeat as needed.
As with all spot-cleaning remedies, be sure to test on an out-of-the-way piece of carpet first.
Blot up as much of the grease stain as possible, then apply something like cornflour, which will act to absorb the grease. After a few minutes, use a brush with stiff bristles to brush away the stain and break it up. If the spot is still there, Coit suggests trying a dry-cleaning solvent and applying it with a clean sponge according to the directions.
Next, create what Coit calls a dry spotter, made by combining eight-parts liquid dry-cleaning solvent and one-part coconut oil. Mineral oil works, too, but not as effectively. Apply the mixture to the stain. Blot with a dry, absorbent towel or pad, and repeat as needed.
As with all spot-cleaning remedies, be sure to test on an out-of-the-way piece of carpet first.
Spots on sisal and seagrass Sisal and seagrass complement a variety of interior design styles, but they can also be tricky to spot clean, which is why Sisal Carpet in the US has posted a comprehensive spot removal chart on the company’s website that addresses everything from alcoholic beverages to vomit.
As an example, here’s what they suggest for cleaning a wine stain on sisal.
To begin, immediately blot (do not rub) the spill with white paper towels or a clean, absorbent cloth. Sprinkle on an absorbent powder such as salt or talcum powder, then add cold water and blot. Finally, dab on the mild washing-up liquid solution, being careful not to saturate the sisal. Work inwards from the edge of the spot to prevent the stain from spreading.
Wait a few minutes to give the detergent time to work, then blot the moisture with paper towels or an absorbent cloth. Rinse with clear water applied to a clean cloth. Do not pour the water directly on the carpet. Finally, remove excess moisture by applying pressure with paper towels.
As an example, here’s what they suggest for cleaning a wine stain on sisal.
To begin, immediately blot (do not rub) the spill with white paper towels or a clean, absorbent cloth. Sprinkle on an absorbent powder such as salt or talcum powder, then add cold water and blot. Finally, dab on the mild washing-up liquid solution, being careful not to saturate the sisal. Work inwards from the edge of the spot to prevent the stain from spreading.
Wait a few minutes to give the detergent time to work, then blot the moisture with paper towels or an absorbent cloth. Rinse with clear water applied to a clean cloth. Do not pour the water directly on the carpet. Finally, remove excess moisture by applying pressure with paper towels.
Call in the professionals
Sometimes, in spite of our best efforts, stubborn stains or spots on vintage or delicate rugs may require the attention of a hired professional, in this case a carpet-cleaning expert.
Tell us…
Do you have any sure-fire tips for removing stains on carpets or rugs? Spill your secrets in the Comments.
Sometimes, in spite of our best efforts, stubborn stains or spots on vintage or delicate rugs may require the attention of a hired professional, in this case a carpet-cleaning expert.
Tell us…
Do you have any sure-fire tips for removing stains on carpets or rugs? Spill your secrets in the Comments.
Sponsored
Reload the page to not see this specific ad anymore