LVT flooring, lot of scratches
NvN
last year
Featured Answer
Sort by:Oldest
Comments (6)
Sonia
last yearNvN
last yearRelated Discussions
Need help on flooring!
Comments (21)You should have a professional installer in your area take a look at your home so you can discuss what end result you are wanting. You may need to use an engineered wood. This is still an all wood product and is much more dimensionally stable than solid wood. This is a huge advantage if you are in an older home or in the midwest where humidity levels can drastically change from season to season. A solid wood will cup or curl if humidity and moisture levels are not managed. Your installer should do a moisture test before installation to make sure the installation does not fail. All warranties will be voided if this step is not taken. Also, your transitions will need to be considered. Is the new wood floor going to butt up to tile, carpet, or vinyl? The height difference in the two products will need to be taken into consideration. You will have a greater selection of thicknesses in the engineered woods. Engineered wood should be several plys, all wood. If you choose a solid wood, the hand scraped versions are fantastic for a high traffic area with children. Hickory, Red Oak, most Brazilian Species, and even Bamboo are hard enough to take everyday traffic and still look terrific. Good luck!...See MoreSuitable flooring for kitchen
Comments (3)Wood and dogs are never a good combo I have slate look and feel laminate which has withstood 7 yrs of 2 big goldies with not one scratch and grandkids in and out of the pool....See MoreMixing antique brass and polished chrome in the dining room & kitchen
Comments (16)What I'm actually wondering though is about mixing the metals - so having the chandelier and lamps with the touch of silver - or would I be better to source antique brass lamps like I have in some other rooms in the house - I kind of wanted to feature quite a bit of glass, and generally the glass comes with chrome, but I'm not sure if it's too modern for the sideboard etc, and mores worried about the clash of metals, but something tells me it might be ok in this instance! I have chrome taps and rainfall shower head in new bathroom and kept with antique brass for the light fittings and door/press knobs. Also yes the room is small but that's not an issue - it is what it is and I'm fine with it!...See MoreNeed help choosing the colour of my hardwood floor
Comments (3)Matt finish walnut will show pretty much everything...the yellow 'doodle hair will show everytime it lands. The good news is everything is so dark you will only see half of the dog hair. A ligher floor in a dark home will have the same effect as a dark floor in a well lit home. You might want to look at a floor that is stained (like white or European Oak) with a mid-tone brown (2 steps lighter than walnut) and you will have your crisp definition between wood and wall AND you will have a floor that is more forgiving with 'doodle curls. And be aware that many people find a matt finishe VERY hard to live with. It shows every hand print, paw print, nose print, "skin" print you can imagine. Skin oils are SHINIER than a matt finish = shows up every time a finger, toe, foot, dog pad hits the floor. Everytime. A satin is easier to live with....See MoreSonia
last yearSonia
last yearAlex Burnett
last year
Sponsored
Reload the page to not see this specific ad anymore
NvNOriginal Author