skip to main content

like the flooring

7 years ago

hi i wanted to check if the wood flooring is tiles or wood, to get a neat finish from tiles to wood effect flooring and not have to use a strip, did the builder have to do anything particular?
i am looking to get this effect in my kitchen - many thanks

Kitchen · More Info

Comments (2)

PRO
N&K Interiors
7 years ago
Hi there,

Thank you for your enquiry.

Yes, this is wood flooring fitted to the floor with underlay and meets the ceramic mosaic tiles at the same level.
Laid by our floor specialist with a coloured mastic where the two meet.

Hope this helps.
NYC
Original Author
7 years ago
that's brilliant - thank you so much for the information.
Related Discussions
Need help on flooring!
Q
Comments (21)
You should have a professional installer in your area take a look at your home so you can discuss what end result you are wanting. You may need to use an engineered wood. This is still an all wood product and is much more dimensionally stable than solid wood. This is a huge advantage if you are in an older home or in the midwest where humidity levels can drastically change from season to season. A solid wood will cup or curl if humidity and moisture levels are not managed. Your installer should do a moisture test before installation to make sure the installation does not fail. All warranties will be voided if this step is not taken. Also, your transitions will need to be considered. Is the new wood floor going to butt up to tile, carpet, or vinyl? The height difference in the two products will need to be taken into consideration. You will have a greater selection of thicknesses in the engineered woods. Engineered wood should be several plys, all wood. If you choose a solid wood, the hand scraped versions are fantastic for a high traffic area with children. Hickory, Red Oak, most Brazilian Species, and even Bamboo are hard enough to take everyday traffic and still look terrific. Good luck!
...See More
Have to order flooring tomorrow. Help me choose.
Q
Comments (4)
Here is a "stone look" Armstrong product linoleum that will not compete with all the color of backsplash. It is slightly darker than the cabinets which will ground the room nicely. Agree that you probably don't need more tile lines.
...See More
Floors
Q
Comments (3)
Kitchen's suffer from extreme humidity variation, so you should fully adhere the solid or engineered flooring to avoid a bowing/warping floor in a few months time However, here's another viable option; luxury vinyl tiles (LVT). Generally, LVTs are 2.5mm thick, made from 100% pvc (therefore waterproof), come with a thick polyurethane wear layer that normally is backed up with a manufacturers warranty, with a wood or stone effect finish. LVTs are great with underfloor heating and unlike ceramics, they don't break when heavy objects are dropped on them and unlike wooden floors, once laid, LVTs need no further maintenance other than regular vacuuming and washing. LVTs are almost indestructible! There are many options available but us Flooring Gurus recommend going for a recognised brand. The whole idea about an LVT is for it to look authentic. They need to genuinely look like the wood or stone flooring they are mimicking. Cheap alternatives, when installed, look ... well ... awful! Try looking at Polyflor's Colonia and Camaro. We sell these products online at www.flooringmegastore.co.uk and if you made contact with us, we'd be happy to despatch a few free of charge samples to you, plus a glossy catalogue, to help you research the products a bit more. We're the Flooring Gurus!
...See More
Old pine floors
Q
Comments (15)
We are in the process of filling our gaps with pine slithers (they cam in different widths) You can buy them online. You do suffer from bald/ red knees when you hammer them in and then need to chisel them down so they are flush with the rest of the floor but it really does help. What you can also order with the pine slithers is pine saw dust with resin - you mix the two up and can fill the really narrow gaps which the slithers don't fit into. If you don't mind spending the time doing this I would recommend it yourself (especially if you're worried about costs), depending how big the surface is, and then have someone in to do the sanding. The varnishing you can also do you yourself with a normal paint roller. We also recently had a quote for sanding and varnishing and I think it came to £500 for mid size living room and 3 m length hall.
...See More

Sign Up to Comment

Sponsored

Reload the page to not see this specific ad anymore

More Discussions

How would you lay out this bathroom?

10

Authentic Feng Shui Workshop - Angel Times Limerick 27th April 2024

0

reconfiguring floor plan layout and would love help please

2

Help, do i cancel the windows order

1

Further Education & Training Centre Open Day: Interior Design Classes

0

Ireland

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.